Omron NT-DRT21 Operation Manual page 68

Installing the System Program
Installing the System
Program
1, 2, 3...
Reference The PT will be completely unusable if the system program is not downloaded
• Select Download System/Exit from the menu.
• Click the X button in the upper-right corner of the main system installer window.
• Double-click the system installer icon in the upper-left corner of the system in-
staller window.
• Click the system installer icon in the upper-left corner of the main system in-
staller window and select Close from the menu.
• Press the Alt and F4 Keys.
The computer will return to the Windows screen when the system installer
closes.
Use the following procedure to install the system program.
1. Specify the PT Model of the PT in which the system will be installed. The PT
Model field is in the main system installer window.
2. Specify the Drive, File Location (Look in), and System File of the system pro-
gram to be installed. The selected items are displayed in reverse video.
The system programs for the specified PT Model family in the selected
folder will be displayed in the System Files area. Specify the system pro-
gram to be installed in the PT from this area.
The following table shows the system programs which support the Device-
Net Interface Unit for each PT model.
File name
DRT-E0A.31
DRT-E0A.31c
DRT-E0A.631
DRT-E0A.63c
3. Specify the RS-232C port (COM port) that will be used to communicate with
the PT. The COM port field is in the main system installer window.
4. Click the Go button in the main system installer window.
Installation of the system program will begin. The progress of the transfer
will be tracked during the installation.
5. A message will be displayed when installation is completed. Check the mes-
sage and click the OK button to confirm.
When installation of the system program is completed, the following display will
appear at the PT allowing the PT to be restarted with the new system program.
The PT will start regular operation when the system program is started. The sys-
tem menu will be displayed if screen data has not been transferred.
properly after the PT's system program is erased. Always download the system
program completely after the system program is erased.
Corresponding PT model
NT31
NT31C
NT631
NT631C
Press Run System.
Section 5-1
55