Operating Voice Recognition; Introducing Uconnect; How To Activate Voice Commands - FCA US Uconnect 3 2018 Manual

OPERATING VOICE
RECOGNITION
WARNING!
ALWAYS drive safely with your hands
on the wheel. You have full responsi-
bility and assume all risks related to
the use of the Uconnect features and
applications in this vehicle. Only use
Uconnect when it is safe to do so.
Failure to do so may result in an
accident involving serious injury or
death.

Introducing Uconnect

Start using Uconnect Voice Recognition with
these helpful quick tips. It provides the key Voice
Commands and tips you need to know to control
your Uconnect 3 system. Key Features:
• 5" touchscreen
• Three buttons on either side of the display
26

How To Activate Voice Commands

1. Visit UconnectPhone.com to check mobile
device and feature compatibility and to find
phone pairing instructions.
2. Reduce background noise. Wind and pas-
senger conversations are examples of noise
that may impact recognition.
3. Speak clearly at a normal pace and volume
while facing straight ahead. The microphone is
positioned on the rearview mirror and aimed at
the driver.
4. Each time you give a Voice Command, you
must first push either the VR or PHONE button,
wait until after the beep, then say your Voice
Command.
5. You can interrupt the help message or sys-
tem prompts by pushing the VR or PHONE
button and saying a Voice Command from cur-
rent category.
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
1 — Push To Begin Radio Or Media Func-
tions
2 — Push To Initiate, Answer/End A Phone
Call, Send Or Receive A Text