Operating Radio Mode - FCA US Uconnect 3 2018 Manual

With 5" display
Table of Contents

Advertisement

OPERATING RADIO MODE

The radio is equipped with the following modes:
• FM
• AM (SW/LW/MW – If Equipped)
• DAB/DAB+ – If Equipped
Push the RADIO button on the faceplate, to
enter the Radio Mode. The different tuner
modes; FM/AM/SW/LW/MW/DAB/DAB+ – If
Equipped, can then be selected by pressing the
corresponding buttons on the touchscreen in the
Radio mode.
Switching The System ON/OFF
The screen will switch on/off when the power
button is pushed.
Volume/Mute
Rotate the VOLUME rotary knob to adjust the
Volume. When the audio system is turned on,
the sound will be set at the same volume level
as last played.
Push the MUTE button to mute the system.
Push the MUTE button again to unmute the
system.
Tune/Scroll Control
Turn the rotary TUNE/SCROLL control knob
clockwise to increase or counterclockwise to
decrease the radio station frequency. Push the
ENTER/BROWSE button to choose a selection.
12
Seek Functions
Seek Up
Press and release the "Seek Up"
the touchscreen to tune the radio to the next
listenable station or channel.
During a Seek Up function, if the radio reaches
the starting station after passing through the
entire band two times, the radio will stop at the
station where it began.
Fast Seek Up
Press and hold the "Seek Up"
touchscreen to advance the radio through the
available stations or channels at a faster rate,
the radio stops at the next available station or
channel when the button on the touchscreen is
released.
Seek Down
Press and release the "Seek Down"
on the touchscreen to tune the radio to the next
listenable station or channel.
During a Seek Down function, if the radio
reaches the starting station after passing
through the entire band two times, the radio will
stop at the station where it began.
Fast Seek Down
Press and hold the "Seek Down"
touchscreen to advance the radio through the avail-
able stations or channel at a faster rate, the radio
stops at the next available station or channel when
the button on the touchscreen is released.
Direct Tune Functions
Press the "Tune" button on the touchscreen to
directly tune to a specific radio station. A keypad
button on
will appear. On the keypad, enter in your desired
radio station, and the system will automatically
tune to it.
Setting Presets
The Presets are available for all Radio Modes
and are activated by pressing any of the four
"Preset" buttons on the touchscreen, located at
the top of the screen.
button on the
When you are receiving a station that you wish
to commit into memory, press and hold the
desired numbered button on the touchscreen for
more that two seconds or until you hear a
confirmation beep.
The Radio stores up to 12 presets in each of the
Radio modes. Four presets are visible at the top
button
of the radio screen.
Audio Settings
1. Push the SETTINGS button on the right side
of the radio faceplate. If the settings button is not
present, push the MORE button on the faceplate
then the "Settings" button on the touchscreen.
2. Scroll down and press the "Audio" button on
the touchscreen to open the Audio menu.
button on the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uconnect 3 2019

Table of Contents