CUMMINS ALLISON JetSort Cleaning Procedures
CUMMINS ALLISON JetSort Cleaning Procedures

CUMMINS ALLISON JetSort Cleaning Procedures

Advertisement

Daily cleaning of JetSort machines is recommended to ensure maximum productivity and reliability.

Recommended Cleaning Materials

Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye
contact. If eye contact occurs, flush eye(s) with cool water for 5 minutes – remove
contact lenses if present – continue flushing eye (s) with cool water for 15 more
minutes. If irritation persists, consult physician.
Individuals with sensitive skin should rinse hands after using.
■ Simple Green Safety Towels. (Part number: 022-2118-00.) A pre-moistened microfiber towel also may be used. If using
Simple Green concentrate, dilute to: 30 ml of Simple Green per 240 ml of water. For material-safety-data sheets, see
simplegreen.com.
■ Microfiber towels. (Part number: 022-2223-00.)
■ Vacuum cleaner. (In the United States: Order standard vacuum part number 022-1959-00 or heavy-duty vacuum part
number 022-1308-00. Outside of the United States: Buy vacuum locally.)
800 786 5528
JetSort Cleaning Procedures
Page 1 of 5
cumminsallison.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JetSort and is the answer not in the manual?

Questions and answers

Summary of Contents for CUMMINS ALLISON JetSort

  • Page 1 JetSort Cleaning Procedures Daily cleaning of JetSort machines is recommended to ensure maximum productivity and reliability. Recommended Cleaning Materials Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye contact. If eye contact occurs, flush eye(s) with cool water for 5 minutes – remove contact lenses if present –...
  • Page 2 Cummins Allison service representative for assistance. Cleaning the sorting chamber Clean Jetsort sorting chamber of at least once a week to remove accumulated coin dust and debris. Never wipe sort disk or pad, except as instructed in this document.
  • Page 3 6. Inspect sort pad for any cuts that may affect the sorter's accuracy. Replacement sort pads are available from your Local Cummins Allison branch office. 7. Replace the sort head and secure the latch. 8. Reinstall coin tray and secure in place.
  • Page 4 Sort Disk Partial Removal The sort disk can be partially removed to clean and service the sort disk and to remove coins and debris from the coin pad. Figure 2 Sort Disk (Top View) Sort disk partial removal– Figure 2 Remove lift tray assembly.
  • Page 5 2. Turn the three toggle catches until they are perpendicular to the hold-down forks. Reinstall the lift tray assembly. © 2009 Cummins-Allison Corp. JetSort.7240.Rev.F 800 786 5528 Page 5 of 5 cumminsallison.com...

Table of Contents