Valu-air SF5040E Operating Instructions Manual

Fastener driving tools operated by compressed air, air-powered 2 in 1 combi nailer
Hide thumbs Also See for SF5040E:

Advertisement

OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED
AIR
AIR-POWERED 2 IN 1 COMBI NAILER
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construction and design:
 Damage to hearing if effective hearing protection is not worn.
 Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately
managed and properly maintained.
Wear eye protection.
TABLE OF CONTENTS:QUICK START GUIDE
TECHNICAL SPECIFIACTIONS
SAFETY GUIDELINES
KEY PARTS DIAGRAM
IMPORTANT INFORMATION
TYPES OF FASTENERS
OPERATING INSTRUCTIONS
MAINTENANCE
TROUBLESHOOTING
EXPLODED VIEW
PARTS LIST
WARRANTY
Air 2 in 1 Combi Nailer SF5040E
1
Model No.: SF5040E
IMPORTANT:
Read all safety rules and operating Instructions carefully
before first use it. Keep this Manual for future reference.
2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF5040E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Valu-air SF5040E

  • Page 1 TABLE OF CONTENTS:QUICK START GUIDE  TECHNICAL SPECIFIACTIONS  SAFETY GUIDELINES  KEY PARTS DIAGRAM  IMPORTANT INFORMATION  TYPES OF FASTENERS  OPERATING INSTRUCTIONS  MAINTENANCE  TROUBLESHOOTING  EXPLODED VIEW  PARTS LIST WARRANTY 2018 Air 2 in 1 Combi Nailer SF5040E...
  • Page 2: Safety Guidelines

    Compressor must be grounded. Do not use grounding adaptors. Risk of personal injury: Do not direct compressed air from the air hose toward the user or other personnel. Risk of inhalation: Never directly inhale the air produced by the compressor. Air 2 in 1 Combi Nailer SF5040E...
  • Page 3 Failure to comply may result in moderate injury or damage to equipment. Air 2 in 1 Combi Nailer SF5040E...
  • Page 4: Key Parts Diagram

    Keep hands and other parts of the body away from the tools discharge and working areas when connecting the air supply. Failure to comply could lead to serious injury or loss of life.  It is recommended that a filter-regulator-lubricator is used and located as close to the tool as possible. Air 2 in 1 Combi Nailer SF5040E...
  • Page 5: Operating Instructions

    Check for proper functioning by applying the muzzle of the fastener driving tool to a piece of wood or wooden material and actuating the trigger once or twice. 4.3Filling the magazine Air 2 in 1 Combi Nailer SF5040E...
  • Page 6 Potential hazard that may result in moderate injury or damage to equipment. Operate the tool with the utmost care when connected with the air compressor. Failure to comply may result in moderate injury or damage to equipment. Air 2 in 1 Combi Nailer SF5040E...
  • Page 7: Maintenance

    1. Change and use correct fastener. 2. Damaged or worn driver guide. 2. Check and replace the driver. 3. Magazine or nose screw loose. 3. Tighten the magazine. 4. Magazine is dirty. 4. Clean the magazine. Table 1 Air 2 in 1 Combi Nailer SF5040E...
  • Page 8 SF5040E 2 IN 1 Combi Nailer Explosive View and Parts list Issue date: Version no.: Qty. No. Qty. No. Qty. No. Qty. Description Description Description Description Gun Body Bolt Pin 2.5×16 Pusher Deflector Spring Rubber Washer Safety Space Compressed Spring O-ring 1.7x2...

Table of Contents