Download Print this page

Repatha Pushtronex Instructions For Use Manual page 8

Ri-path-a; single-use on-body infusor and prefilled cartridge

Advertisement

You must remove both green pull tabs to turn the loaded on-body infusor on. You will
hear beeping and see a flashing blue status light.
Do not pull the skin adhesive backing off the on-body infusor.
Do not touch the skin adhesive.
Do not touch the start button until you have placed the loaded on-body infusor
on your skin.
Do not touch the needle cover area.
Do not place the loaded on-body infusor on your body if the red status light
flashes continuously.
Do not fold the skin adhesive over onto itself.
Choose your on-body infusor injection site. Only use the outer arm if someone else
3B
is giving the injection.
Stomach area placement
Stretch method for stomach
Important: Adjust your body posture to avoid skin folds and bulges.
When the blue light flashes, the on-body infusor is ready. Keep the stretch
(stomach area method only). Hold the loaded on-body infusor with the blue light
3C
visible, and place it on your skin. You may hear beeps.
Stomach area placement
The loaded on-body infusor will lay flat on your body. Make sure all of the adhesive is
attached to your skin. Run a finger around the adhesive edges to secure it.
Make sure clothing does not get in the way of the loaded on-body infusor, and you can
see the blue light at all times.
● Do not move the loaded on-body infusor after it has been placed onto your skin.
Thigh placement
or
Do not stretch for thigh
Thigh placement
or
Page 8

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pushtronex and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel