Repatha Pushtronex Instructions For Use Manual page 7

Swing the door to the left. Then, squeeze firmly until it snaps shut. Apply enough
pressure when closing the door and make sure there is a "snap" before going to
2E
the next step.
Make sure the cartridge fits securely in the on-body infusor before you close the door.
● Do not close the door if the cartridge is missing or not fully inserted.
● Do not touch the start button until you have placed the loaded on-body infusor
on your skin.
Important: After you load the on-body infusor, go to the next step right away.
Peel away both green pull tabs to show the adhesive. The on-body infusor is on
3A
when the blue status light flashes.
Left pull tab
Squeeze
Tight
"snap"
Step 3: Inject
Skin adhesive
Right pull tab
Page 7