Stick Deadband - Spektrum BEASTX AR7210BX User Manual

E Stick Deadband
Stick deadband is the range around the very center of the stick where the Spektrum AR7210BX will
not react. Depending on the calibration of the transmitter, the sticks may not be in the exact same
center position each time they return to center. This can cause unwanted rotation on the axis of stick
movement and unwanted servo movement even when the heli is standing still on the ground.

Stick Deadband

Set Too Low
Stick Deadband
Set Too High
Status-LED
OFF
Purple Solid
Red Flashing
Red Solid
Blue Flashing
Blue Solid
The option "User Defined" allows you to define your own settings using the optional PC Software.
Press the setup button once to move to Parameter Menu Point F.
It is difficult to find a stick position where no input is sent to the
Spektrum AR7210BX. This can cause the helicopter to tip over on
takeoff or will make the helicopter difficult to control in flight.
You will feel a large range of stick movement where you have no
control. This can lead to difficult precision hovering.
Stick Deadband
User Defined
1
2*
3
4
5
39
*
Factory Setting
EN