Letscom ST-BE30 User Manual page 9

● When the earbuds are on but not paired with your phone or other
Bluetooth devices, they will exit the pairing mode and be
automatically off in 5 minutes.
Pair ONE earbud (Mono Use)
You can use both earbuds simultaneously or use either of the two
earbuds alone.
1) Make sure the earbud and your phone or other Bluetooth devices
are next to each other (within 3 feet, no obstacles between).
2) Turn on the Bluetooth of your phone or other Bluetooth devices.
3) Take the earbud out of the charging case.
4) Turn off the earbud by pressing and holding the MFB button for 6
seconds.
5) Press and hold the MFB button on the earbud until the indicator
flashes red and blue alternately and earbud enters pairing mode.
6) In the list of found Bluetooth devices in your phone or other
Bluetooth devices, choose "ST-BE30-L" if you use the left earbud or
"ST-BE30-R" if you use the right earbud to pair.
Note:
When the left/right earbud is connected to your phone and you take
the other earbud out of the charging case, earbuds will pair with each
other and then link back to your phone automatically (in the condition
that you have paired both earbuds with your phone before) .
●
Play/pause playing songs
Press the MFB button to pause and press the MFB button again to
resume playing songs.
●
Last/Next song
Press and hold the MFB button on the left/right earbud for 3
seconds until you hear a "Do" sound to skip to the last/next song.
- 8 -