Table of Contents
Related Manuals for Letscom ST-BE32
Summary of Contents for Letscom ST-BE32
- Page 1 Wireless Earbuds ST-BE32 User Manual Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
-
Page 2: Package Contents
Package Contents ● Wireless earbuds × 1 pair (left and right) ● Charging case × 1 ● Eartips × 3 pairs (large, medium, small) ● Micro USB cable × 1 ● User manual × 1 At a Glance Left Earbud Right Earbud Charging Case (Main Earbud) - Page 3 Earbud LED Indicator Guide ● Power on: LED indicators flash blue 5 times ● Power off: LED indicators stay red for 2 seconds and go off ● Pairing mode (using both earbuds): LED indicator on the left earbud flashes red and blue alternately ●...
-
Page 4: Wearing The Earbuds
Charging case is not being charged ● 1-25% battery: the leftmost indicator stays on ● 25%-50% battery: the left 2 indicators stay on ● 50%-75% battery: the left 3 indicators stay on ● 75%-100% battery: the 4 indicators stay on ●... -
Page 5: Using The Earbuds
Using the Earbuds When you use the earbuds for the first time, remove the insulating films on the charging contacts of the earbuds. ● Charge the earbuds 1) Align the charging contacts on the right earbud with the charging pins on the right side of the case. 2) Repeat step 1 and to charge the left earbud. - Page 6 ● Charge the charging case 1) Plug the small end of the USB cable into the Micro USB port of the charging case. 1) Plug the other end into a USB wall charger or computer (DC 5V) that is powered on. Notes: ●...
- Page 7 3) Turn on the earbuds (when they are in shutdown state) and the earbuds enter pairing mode (LED indicator on the left earbud flashes red and blue alternately). 4) In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose "ST-BE32-L" to pair. - 6 -...
- Page 8 MFB button of the left earbud until the indicator on the left earbud flashes red and blue alternately and earbud enters pairing mode. Choose " ST-BE32 -L" in your phone to pair and turn on the right earbud. ● When both earbuds are connected to your phone, if you put the right earbud back to the charging case, you can use the left earbud alone without interruption;...
- Page 9 6) In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose "ST-BE32-L" if you use the left earbud or "ST-BE32-R" if you use the right earbud to pair.
- Page 10 ● Press and hold the MFB button for 3 seconds to reject an incoming call. Note: To make/answer calls using ST-BE32 erabuds, choose " ST-BE32 -L" as "Audio" route on your phone when you are making/answering calls. ● Reset the earbuds/clear all pairing information on the...
-
Page 11: Troubleshooting
2) Press and hold the MFB button of the left earbud until the indicator on the left earbud flashes red and blue alternately and earbud enters pairing mode. 3) Choose "ST-BE32-L" in phone B to pair and turn on the right earbud. Q: Why isn’t the sound clear/consistent sometimes? A: Connection is not stable. - Page 12 ● The distance between the earbuds and your Bluetooth device is at the edge of the Bluetooth pairable distance. ● Transmitted signals encounter obstacles or human body blockage. ● There are high-power electronic devices nearby. ● There are other Bluetooth devices and are being turned on/off nearby. To resume stable connection between the earbuds and your Bluetooth device, try to avoid the above conditions and do the pairing again following the steps in the pairing failed part.
-
Page 13: Specifications
Specifications Model ST-BE32 Bluetooth Standard V5.0 33 feet/10 meters (No obstacles Operating Range between) Supporting Protocols A2DP/HFP/HSP/AVRCP 1 hour (earbuds); 2 hours (charging Charging Time case) about 4.5 hours (Varies according to Talk/Playing Time volume level and audio content) Waterproof Rate... -
Page 14: Safety And Warranty
SAFETY AND WARRANTY Important Safety Instructions ● Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention. ● If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product. - Page 15 ● Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, waterskiing, surfing, etc. ● This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. ● Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the earbuds.
- Page 16 ※ Do not use the charging case in excess of its output range. ※ Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. ※...
Need help?
Do you have a question about the ST-BE32 and is the answer not in the manual?
Questions and answers