Sony Handycam HDR-UX9E Operating Manual page 116

Troubleshooting (Continued)
• Only the S VIDEO plug of the A/V
connecting cable with S VIDEO (optional)
is connected to the TV. Make sure the red
and white plugs are connected (p. 51).
The image appears distorted on the
4:3 TV.
• This happens when viewing a image
recorded in the 16:9 (wide) mode on a 4:3
TV. Set [TV TYPE] correctly (p. 93) and
play back the image.
Black bands appear at the top and
bottom of the screen of the 4:3 TV.
• This happens when viewing a image
recorded in the 16:9 (wide) mode on a 4:3
TV. This is not a malfunction.
Dubbing to other devices
You cannot dub.
• You cannot dub images using the HDMI
cable.
• The A/V connecting cable is not connected
properly. Make sure to connect to the input
jack of another device (p. 66).
Connecting to a computer
You cannot install "Picture Motion
Browser."
• Check the computer environment required
to install "Picture Motion Browser."
• Install "Picture Motion Browser" in an
orderly manner (p. 103).
"Picture Motion Browser" does not
work correctly.
• Finish "Picture Motion Browser" and
restart your computer.
116
Your camcorder is not recognized by
the computer.
• Install "Picture Motion Browser" (p. 103).
• Disconnect devices from the USB jack of
the computer other than the keyboard,
mouse, and your camcorder.
• Disconnect the USB cable from the
computer and your camcorder, and restart
the computer, then connect the computer
and your camcorder again in an orderly
manner (p. 105).
• Make sure the media check tool of the
computer activates. For details on the
media check tool, see "PMB Guide."
Functions that cannot be used
simultaneously
The following list shows examples of
unworkable combinations of functions and
menu items.
Because of following
Cannot use
settings
Back light [SPOT METER].
[FIREWORKS],
[MANUAL] in
[EXPOSURE]
[WIDE SELECT] [OLD MOVIE]
[AUTO SLW [SMTH SLW REC],
SHUTTR] [D.EFFECT], [SCENE
SELECTION],
[COLOR SLOW
SHTR], [SUPER
NIGHTSHOT],
[FADER]