Sony Handycam HDR-UX7E Operating Manual page 44

Playing the image on a TV (Continued)
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN
input on the VCR using the A/V connecting
cable. Set the input selector on the VCR to
LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or red
(right channel) plug to the audio input jack
of your TV or VCR.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use a 21-pin adaptor (optional) to view
playback images.
b Notes
• When you output images using the A/V
connecting cable, images are output with SD
(standard definition) image quality.
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV (p. 66).
Some settings may need to be adjusted on the
TV when playing back. Refer to the instruction
manual of your TV for details.
z Tips
• If you connect your camcorder to your TV using
more than one type of cable to output images,
the order of priority of the output signal is as
follows:
HDMI t component video t S VIDEO t
audio/video.
• HDMI (High Definition Multimedia Interface)
is an interface to send both video/audio signals.
The HDMI OUT jack outputs high quality
images and digital audio.
44