Step 3: Turning The Power On And Setting The Date And Time - Sony Handycam HDR-UX7E Operating Manual

• When attaching an optional video light, it is
recommended that you use an NP-FH100
battery pack.
• We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
• Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
On the AC Adaptor
• Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Step 3: Turning the
power on and setting
the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
Touch the buttons on the
screen.
POWER switch
1
While pressing the green button
in the center, slide the POWER
switch repeatedly in the direction
of the arrow to turn on the power.
(Movie): To record movies
(Still): To record still images
The [CLOCK SET] screen appears.
2
Select the desired geographical
area with v/V, then touch [NEXT].
21
Continued ,