Sony HDR-TG1 Handycam&reg Handbook page 56

• Refer also to the instruction manual of the
printer to be used.
• Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
– Close the LCD panel
– Press POWER
– Operate the
switch
– Remove your camcorder from the Handycam
Station or the Dedicated USB Terminal
Adaptor
– Disconnect the USB cable from your
camcorder, the Handycam Station, the
Dedicated USB Terminal Adaptor or the
printer
• If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
• You can select only the paper sizes that the
printer can print.
• On some printer models, the top, bottom, right,
and left edges of images may be trimmed. If you
print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
• Some printer models may not support the date
printing function. Refer to your printer's
instruction manual for details.
• The still images described below may not be
printed out:
– The still image edited by a computer
– The still image recorded by other devices
– The still image file exceeding 4 MB
– The still image file larger than 3,680 × 2,760
pixels
z Tips
• PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
• You can print a still image on the still image
playback screen from
56
(Movie)/ (Still) select
(OPTION) MENU.