Settings Max. Power; Settings "Standby; Settings "Temperature Drop - Olsberg Levana Manual

Settings "max. power"
only for "automatic" mode
Display
settings
frost pro 5°C
night set 12°C
max. power 5

Settings "standby"

only for "automatic" mode
Display
settings
night set 12°C
max. power 3
standby on

Settings "temperature drop"

only for "automatic" mode
Display
settings
max. power 3
standby on
temp drop 2 °C
Action Description
The maximum power level between 1-5 can be set:
- Power level 1 corresponds to 2.6 kW
- Power level 5 corresponds to 8.0 kW
Factory setting: 5
or
Select the power level with (ENTER) (the value
flashes), set the value with ↓ or ↑ and confirm with
(ENTER).
Action Description
With switched off standby mode the appliance heats,
when reaching the preset room temperature, contin-
ues at the lowest power level. This avoids ignition
processes.
In standby mode the appliance switches off when
reaching the set room temperature plus the set
switch off hysteresis (1°C to 3°C) (see menu „set-
tings temperatur off").
The temperature at which the appliance will again be
or
switched on is described in the menu "settings tem-
perature drop".
If standby operation is not desired, the display must
be changed to "off".
Select "on" with (ENTER) ("on" flashes), and with ↓
or ↑ change to "off".
Confirm "off" with (ENTER).
Action Description
Temperature drop describes the switching difference
between the set room temperature and switching
back on of the appliance in standby operation.
Adjustable temperature range: 1°C - 6°C
or
Factory setting: 2°C
Select the temperature with (ENTER) (the value
flashes), set the value with ↓ or ↑ and confirm with
(ENTER).
59