Playing The Image On A Tv - Sony Handycam HDR-CX11E Operating Manual

To adjust the sound volume of movies
You can adjust the volume by touching
, then touch
 Tips
On the VISUAL INDEX screen,  appears

with the image on the tab that was most
recently played back/recorded. When you touch
an image marked with , you can play it
back from the point it was previously stopped.

Playing the image on a TV

Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen
differ depending on what type of TV is
connected, and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 8).
Refer also to the instruction manuals
supplied with the device to be connected.

Notes
When recording, set [X.V.COLOR] to [ON]

to play back on an x.v.Color-compliant TV.
Some settings may need to be adjusted on the
TV when playing back. Refer to the instruction
manual of your TV for details.
Operation flow
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.

Connect your camcorder and TV
referring to [TV CONNECT Guide].
(HOME) 
Touch
[TV CONNECT Guide].

Make the required output settings
on your camcorder.
1
/ .
(OTHERS) 
Handycam Station

Notes
When the A/V connecting cable is used to

output images, images are output with SD
(standard definition) image quality.
Your camcorder and the Handycam Station are

equipped with A/V Remote Connector or A/V
OUT jack (p. 18). Connect the A/V connecting
cable or component A/V cable either to the
Handycam Station or to your camcorder. If you
connect A/V connecting cables or component
A/V cable to both the Handycam Station
and your camcorder at the same time, image
disturbance may occur.
A/V OUT
Open the
jack cover.
A/V Remote
Connector