Setup Option B: One Key Wifi - FALEEMI FSC776W Quick Start Manual

HD Pan/Tilt WiFi Security IP Camera

Setup Option B: One Key WiFi

1.
Please put your camera close to your
WiFi router and plug it in, you will hear
"Beep" . The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red and blue lights are
blinking slowly.
Note: when the camera is startup, Note: when the camera is startup,
"Beep"
it will sound one it will sound one
Only when it blinks red and blue
slowly , should you start
5 mins
to do the setup. It lasts only 5 mins
NOTE
after the camera is powered up.
If you don't do the setup in 5 mins, please
unplug the camera and plug it in again to
get another 5 mins setting time.
05
Model: FSC776B/W
2.
Open the Faleemi App, click on the menu
icon [More] , Click on [One key WiFi]
3.
Enter your 2.4GHz WiFi password,
. Click on [Configuration]
Click on it to make sure your Click on it to make sure your
WiFi password is correct.
Quick Start Guide
Note: Note: When When click on "
button. Your phone will make a loud button. Your phone will make a loud
sound to transmit the data to the camera. sound to transmit the data to the camera.
4.
After the configuration is succeeded,
the camera will sound with 2 Beeps.
.
Put your phone
close to
the camera
Troubleshooting
1. If you see the blue light goes off instead of
solid on, the WiFi password you just input may
be wrong. Please reset the camera (instructions
Page 30
in ) and do the setup again.
2. If your WiFi password was correct but still
failed, the WiFi you were connected may be
5GHz WiFi.
3. If all your WiFi and password were correct, it is
still failed, there may be the special characters
apostrophe ( ' ) and ampersand (
SSID or password.
5. Page 7
And follow
your mobile/tablet Faleemi APP.
click on "Configuration Configuration" "
Beep
Beep
& ) in your WiFi
to add the camera to
06