Memory - Medisana MTX Connect Instruction Manual

5.1
Recording
the results
5.2
Displaying
stored results
This unit features 2 separate memories, each with a capacity of 99 memory
slots. Results are automatically stored in the memory selected by the user.
When the memory is full, the oldest reading is always the first to be deleted.
Press the MEMORY button
ments in the display have been shown, an average value of all the measure-
ments in the selected memory is displayed. This average is indicated by "
When the MEMORY button
(switching between systolic, diastolic, pulse and date/time) of the last mea-
surement stored are displayed. If this measurement was taken in the 3MAM
procedure, is displayed. If an arrhythmia was detected during
the measuring process, the arrhythmia symbol
flashing.
Press the MEMORY button
readings.
If you do not press any buttons for approx. 1 minute, the device automatically
switches back to standby mode.
to display the stored readings. After all the seg-
is pressed again, the individual readings
will be displayed, but not
again to move backwards through the stored
GB

5 Memory

".
31