Medisana MTX Connect Instruction Manual page 35

4.4
Bluetooth
Functions
Pairing the MTX Connect with your smartphone.
1. Download the free-of-charge VitaDock App
or Google Play store.
2. Slide the BLUETOOTH switch
"On" to switch on Bluetooth.
3. Hold down the START button
of the MTX Connect. The time and the flashing Bluetooth symbol
on the display. The Bluetooth interface is in pairing mode for the next 60
seconds and enables you to connect your smartphone to the MTX Connect
within this time.
4. Activate the Bluetooth interface of your smartphone. Select "MTX-BT"
(Fig. D.) from the list of found Bluetooth
devices and enter the pairing code "0000"
depending on the smartphone to connect
the devices (Fig. D.).
5. Press the START button
the MTX Connect again. If you do not
press any buttons for approx. 1 minute, the
device automatically switches to standby
mode.
Note: Pairing the MTX Connect with your smartphone only needs
to be done once, before the first measurement.
Measure and transfer the measurement results to your smartphone.
1. Slide the BLUETOOTH switch
"On" to switch on Bluetooth.
2. Start the VitaDock App (blood pressure) and tap "new" (Fig. A).
3. Tap "connect Bluetooth device", the VitaDock App waits for the MTX
Connect to connect.
4. Press the START button
5. After measuring blood pressure the result is shown on the MTX Connect,
please press in the VitaDock App on MTX BT - screen C, to connect the two
devices. The MTX Connect display shows the measurement results, the
selected user memory, the time and the Bluetooth symbol. The data transfer
symbol flashes.
6. Once the MTX Connect has transfers the current measurement values by
Bluetooth to the VitaDock App, press the START button
MTX Connect again. If you do not press any buttons for approx. 1 minute,
the device automatically switches to standby mode.
7. After successfully connecting the MTX Connect to your smartphone the date
and time are automatically synchronised.
Transfer the measurement results to your smartphone.
1. Start the VitaDock App and tap "new" (Fig. A).
2. Tap "Connect Bluetooth Device", the VitaDock App waits for the MTX
Connect to connect (Fig. B)
4 Operation
from the Apple App Store
on the reverse of the MTX Connect to
for 5 seconds to activate the pairing mode
Fig. D
to switch off
on the reverse of the MTX Connect to
on MTX Connect to start a new measurement.
GB
is shown
to switch off the
29