Dubbing To Vcr Or Dvd/Hdd Recorders - Sony Handycam HDR-UX7 Operating Manual

Dubbing to VCR or DVD/HDD recorders

You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet using the supplied AC Adaptor for this operation
(p. 21). Refer also to the instruction manuals supplied with the devices to be connected.
b Notes
• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard
definition) image quality.
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
• To copy a disc recorded with HD (high definition) image quality, install the application software
(supplied) on your computer (p. 88), and copy the images to a disc in the computer.
A/V OUT jack
Devices with an S VIDEO
jack
: Video/Signal flow
A A/V connecting cable (supplied)
Connect to the input jack of the other
device.
B A/V connecting cable with S
VIDEO (optional)
When connecting to another device via
the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (optional), higher quality images
can be produced than with an A/V
connecting cable. Connect the white and
red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable (optional). The yellow plug
connection is not necessary. S VIDEO
connection only will not output audio.
IN
(White)
S VIDEO VIDEO
(Yellow)
IN
(Red)
(Yellow)
VIDEO
AUDIO
VCRs or DVD/HDD
recorders
b Notes
• You cannot dub to recorders connected with an
HDMI cable.
• To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
(SETTINGS) t [OUTPUT
connected, set
SETTINGS] t [DISP OUTPUT] t [LCD
PANEL] (the default setting) on the HOME
MENU (p. 77).
• To record the date/time and camera settings
data, display them on the screen (p. 73).
• When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
(White) (Red)
AUDIO
Devices without an
S VIDEO jack
Continued ,
53