Pictbridge Compliant Printer - Sony Handycam HDR-UX7 Operating Manual

Digital hd video camera recorder
Hide thumbs Also See for Handycam HDR-UX7:
Table of Contents

Advertisement

Warning indicators and messages (Continued)
disc may enable you to use the disc on your
camcorder (DVD-RW/DVD+RW only)
(p. 62).
x "Memory Stick Duo"
Reinsert the Memory Stick.
• Reinsert the "Memory Stick Duo" a few
times. If even then the indicator flashes, the
"Memory Stick Duo" could be damaged.
Try with another "Memory Stick Duo."
This Memory Stick is not
formatted correctly.
• Check the format, then format the
"Memory Stick Duo" with your camcorder
if necessary (p. 63, 107).
Memory Stick folders are full.
• You cannot create folders exceeding
999MSDCF. You cannot create or delete
created folders using your camcorder.
• Format the "Memory Stick Duo" (p. 63), or
delete them using your computer.
Cannot save still picture.
• When using the Dual Rec function, do not
remove the still image recording media
from the camcorder until disc recording is
finished and still image recording is
complete (p. 36).
x PictBridge compliant printer
Not connected to PictBridge
compatible printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable and
reconnect it.
Cannot print. Check the printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable and
reconnect it.
102
x Others
No further selection is possible.
• You can select up to 100 images at one
time to:
– delete images
– edit the playlist
– print still images
Data protected.
• The disc has been protected with another
device.
Cannot divide.
• You cannot divided a movie that is
extremely short.
Recovering data
vibration.
• Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data on disc.
• Writing data to the disc has failed.
Attempts were made to recover the data,
but they were unsuccessful.
Please wait.
• This is displayed if the disc removal
process takes time. Turn on the camcorder
and leave it for about 10 minutes,
preventing vibration.
Avoid any

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents