Kaliber Innovations Valere Series Owner's Manual page 12

HEPA FILTER REPLACEMENT PROCEDURE
Wilsonart Black 1595-60 Wilsonart Black 1595-60
HEPA FILTER
HEPA Filter (Part No. 40000002) is a disposable filter that should be replaced every 6 months or
sooner.
1. Remove the Baffle Filters as shown on Page 8 (Figure 1).
2. Remove the Filter Access Panel
3. Remove the Pre-Filter
4. Remove the HEPA filter by lifting it up and sliding it out of the duct work
5. Replace the HEPA Filter in the correct orientation (Gasket side down and air-flow arrow
pointing down)
6. Place the Pre-Filter on top of the HEPA
7. Install front access panel and tighten the knobs
8. Reinstall the Baffle Filters
Figure 4.
10