Advertisement
TRAFFIC LIGHT OPERATING
To avoid any damage, and when the equipment will not be used for a longer
period (more than a month), disconnect the batteries and accumulators from the
yellow cupola, from the remote control and from the battery box.
Periodically control the batteries used_by dates.
For the handling of the traffic light, or its accessories such as the
battery, the use of PPE is mandatory (gloves, glasses and safety
shoes).
TTS-Tempo-2 2016
001-V-100
Battery voltage
FEUX:
12,0V
CLIGNOTANT
2
Display
when
switched
on
M
Selection of the different modes by successive pression on the + ou – (mode) user-defined keys.
*The setting of the various user modes described in this manual always starts with the same step.
In order to become familiar with the programming
procedure, it is advisable to test the configuration of
the lights in the workshop, before putting them into
service on site.
■ Turn on the Tempo traffic lights
connecting the battery placed in the battery
box.
■ At that time, the Tempo traffic light is in a
waiting state « central orange light flashing ».
CONTROL MANAGEMENT
Control Management with remote control
-Fixed cycle
-Uneven traffic
-Free cycle
-Crossroad 3T
-Crossroad 3X
-Crossroad 4T
-Crossroad 4X
Selection of the different modes by successive pression on the button
-Flashing orange
-Stand by
-Red only
-Fixed cycle when traffic light is programmed
otherwise « not synchrinized » displayed
Press down the push button for 5 seconds
CAUTIONS
POWER ON
FORCING MODES
Control Management
with pushing button
without disconnecting the battery.
SWITCH OFF
Disconnect the + battery
terminal and press down the
push the button for 5 seconds.
by
RESET
Advertisement
