Advertisement
UNBALANCED TRAFFIC PROGRAMMING
Traffic is more important
on a traffic axis.
LIGHT:
12,0V
FLASHING
CYCLE:
UNEVEN
DIRECTION
TRAFFIC:LOAD
▲
LOAD +
▼
LOAD -
UNEVEN
TRAFFIC:HEAVY
▲
HEAVY
VERY HEAVY
▼
LIMIT
UNEVEN
LENGHT:100m
▲
100m
200m
▼
300m
Traffic light 1
UNEVEN +
12,0V
100m HEAVY
Traffic light 2
UNEVEN -
12,0V
100m HEAVY
M
Selection
Selection
Selection
Selection
m
Validation
a
■ Switch on the remote control
■ Direct it to the window display
■ Select « Uneven » mode with the + and -
(mode) user-defined keys.
■ Validate.
Validation
One side heavy traffic programming
The traffic load setting is done on the 1st
light:
LOAD + : Light 1- for more dense traffic.
LOAD - : Light 1 - for less dense traffic.
■ Select if the traffic is more or less heavy on
this side with + and - (select) user-defined
keys.
Validation
■ Validate.
■ Select the uneven density of the traffic with
the + and - (select) user-defined keys.
(please refer to the time table page 3)
■ Validate.
Validation
■ Select the length between the two traffic light
with the + and - (select) user-defined keys.
■ Validate.
You must hear a double BEEP.
Validation
Validation of the cycle on the 2nd traffic light
■ Go to the 2nd traffic light
■ Direct the remote control to the window
display
■ Validate.
You must hear a double BEEP.
STEP 1
Mode selection
STEP 2
STEP 3
Traffic programming
STEP 4
Roadwork length programming
STEP 5
symbol
symbol
5
Advertisement
