Sony Handycam DCR-DVD406 Operating Manual page 96

Warning indicators and messages (Continued)
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Warning indicator pertaining to
"Memory Stick Duo")
• No "Memory Stick Duo" is inserted
(p. 27).
(Warning indicators pertaining to
"Memory Stick Duo" formatting)*
• The "Memory Stick Duo" is damaged.
• The "Memory Stick Duo" is not
formatted correctly (p. 60, 102).
(Warning indicator pertaining to
incompatible "Memory Stick Duo")*
• An incompatible "Memory Stick Duo"
is inserted (
96
*
p. 102
).
- (Warning indicator pertaining
to the write-protect of the "Memory
Stick Duo")*
• The write-protect tab on the "Memory
Stick Duo" is set to lock (p. 103).
• Access to the "Memory Stick Duo" was
restricted on another device.
(Warning indicator pertaining to
the flash)
Fast flashing
• There is something wrong with the
flash.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient,
so camera-shake easily occurs. Use the
flash.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
* You hear a melody when the warning indicators
appear on the screen (p. 70).
Description of warning
messages
If messages appear on the screen, follow the
instructions.
x Disc
ZRecording on disc disabled.
• A malfunction has occurred with the
disc and the disc cannot be used.