Advertisement
Quick Links
P R O D U C T M A N U A L
B A N J O T W IN
The Banjo Twin does not require any alteration to your instrument; all the components are installed with
special double-sided tape. These will not harm the finish of your instrument and residues can easily be
removed with WD40.
The Banjo Twin works well in passive mode; if a preamp should be necessary we recommend our Pure
Preamp.
Please install the system as shown in the photos, using the supplied double-sided tape for the pickups. See the
photo below for the orientation of the pickups and the exact distance from the bridge feet – it is different on
either side! Secure the two pickup cables on the rod with the supplied cable tie.
We recommend you only apply double-sided tape to the two outer edges of the pickups. We call this the
"catamaran" mounting technique because the center portion of the pickup is free floating. This enhances
response while reducing the adhesive surface by about 40%.
92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com
Advertisement
Related Manuals for K&K Sound BANJO TWIN
Summary of Contents for K&K Sound BANJO TWIN
- Page 1 These will not harm the finish of your instrument and residues can easily be removed with WD40. The Banjo Twin works well in passive mode; if a preamp should be necessary we recommend our Pure Preamp. Please install the system as shown in the photos, using the supplied double-sided tape for the pickups. See the photo below for the orientation of the pickups and the exact distance from the bridge feet –...
- Page 2 The Banjo Twin is equipped with a multi-use endpin jack. This jack should be installed on the outside of the banjo (see photo below) but it also allows for internal installation or for installation in a slot of the outer rim (see photo #3).