SEW-Eurodrive IPOS plus Manual page 144

n
n
kVA
kVA
Compiler – Editor
13
f
f
First steps
i
i
P Hz Hz
P
Establishing com-
munication and
scanning the net-
work
Starting
plus®
IPOS
Compiler
144
Proceed as follows to establish a communication with MOVITOOLS
scan your network:
1. Set up a communication channel (e.g. "serial") to communicate with your units.
For a detailed description on how to configure a communication channel, refer to the
®
MOVITOOLS MotionStudio documentation (manual or online help).
2. Scan your network (unit scan). Press the [Start network scan] button [1] in the tool-
bar.
Proceed as follows to start the IPOS
1. Mark the device you want to start the IPOS
2. Right-click to open the context menu.
plus®
3. Start the IPOS Compiler via the following menu item:
[Programming] / [IPOS Compiler] /
plus®
Compiler via MOVITOOLS
plus®
Compiler for.
®
MotionStudio and
[1]
1132720523
®
MotionStudio:
2123686283
Manual – IPOSplus®