Figure 20: Securing The Hood Supports; Figure 21: Lowering The Hood; Figure 22: Skimmer Collection Cup; Figure 23: Attaching The Skimmer Collection Cup - Red Sea MAX User Manual

Red Sea MAX

Figure 20: Securing the hood supports

4. To lower the open hood, bend the supports out towards
the front of the aquarium.

Figure 21: Lowering the hood

NOTE To disassemble the hood from the aquarium, remove
the hood support pins by inserting the end of a small
screwdriver into the small recess in the head of the
pin. Thereafter, remove the hood pins from the hood
hinges at the back.
Skimmer collection cup

Figure 22: Skimmer collection cup

1. Assemble the collection cup with its lid.
2. Open the skimmer chamber cover in the hood.
3. Line up the hole in the cup bottom with the top of the
skimmer.
4. Attach the collection cup to the skimmer, with the cup
protruding in the direction of the filter media chamber.

Figure 23: Attaching the skimmer collection cup

15
User Manual