Subscribe to Our Youtube Channel
Related Manuals for Red Sea MAX NANO
Summary of Contents for Red Sea MAX NANO
- Page 1 NANO ® Installation and Operation Manual Cabinet Installation Guide Podium Installation Guide AI Prime HD LED Manual...
- Page 2 PRINTING INSTRUCTIONS To print only the Installation and Operation Manual, print pages 2-25. Red Sea MAX NANO ® Complete Plug & Play Open Top Reef System ® Installation and Operation Manual...
- Page 3 Installation and Operation Manual Red Sea MAX NANO ® Complete Plug & Play ® Open Top Reef System Installation and Operation Manual...
-
Page 4: Table Of Contents
Installation and Operation Manual Red Sea MAX NANO ® ® NANO Installation & Operation Manual Safety ..............4 Location ..............5 Unpacking the MAX ® NANO ........6 Components ............7 Assembly ..............8 Installation of Rear Sump Components ......9 Installation of Automatic Top-Off ......13 Installation of LED Modules ...........14... - Page 5 Congratulations on your purchase of the Red Sea MAX NANO complete reef system. ® The Red Sea MAX approach to the coral reef experience is to create ® an environment that is specifically attuned to the needs of coral and all inhabitants on an artificial reef.
-
Page 6: Safety
Installation and Operation Manual Red Sea MAX NANO ® 1 Safety Please read and follow all safety instructions. d. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning. Never pull the cord DANGER: To avoid possible electric shock, special care should be itself to remove the plug from the outlet. -
Page 7: Location
Installation and Operation Manual 2 Location Accessibility The first step in setting up the MAX NANO is to choose ® a suitable location. • Back: Ensure that there is at least 10cm (4") of clearance behind the to allow for sufficient air circulation for a chiller and general ease ®... -
Page 8: Unpacking The Max ® Nano
Installation and Operation Manual Red Sea MAX NANO ® 3 Unpacking the MAX NANO System ® Please read this section carefully before proceeding. NOTE: Every precaution has been taken to ensure the safe arrival of the NANO aquarium system, however before installing a new ®... -
Page 9: Components
Installation and Operation Manual 4 Components NANO system main components ® NANO type glass aquarium with integral rear sump 75L (20 gal) ® NANO Cabinet (optional) Self-assembly ® Pump Switch-box LED – Prime HD™ light units Rear Sump Protein Skimmer NANO Circulation pumps 1 x 950lph (240 gph) -
Page 10: Assembly
Installation and Operation Manual Red Sea MAX NANO ® 5 Assembly 5.2 Pump Switch-box Align the Pump Switch-box with the holes provided in the rear wall of the Perform the assembly and installation of all of the components in the aquarium and fix into position with the screws provided. -
Page 11: Installation Of Rear Sump Components
Installation and Operation Manual 6 Installation of Rear Sump Components 1. Detachable Surface Skimmer 2. Protein Skimmer 3. Carbon 4. Circulation Pump 5. Pump Outlet Nozzle 6. Bubble trap sponge 7. Skimmer Outlet Sponge 8. Automatic Top Up 9. Micron Filter Bag NANO rear sump component assembly diagram ®... - Page 12 Installation and Operation Manual Red Sea MAX NANO ® Overview of the MAX NANO filtration and 6.1 Protein Skimmer: ® circulation system The MAX NANO protein skimmer ® consists of three parts: skimmer The MAX NANO rear sump has a complete multistage filtration system ®...
- Page 13 NOTE: The MAX NANO is supplied with a 225 Micron thin mesh filter ® bag (#40580). 100 micron fine polishing filter bags (#40581) are available from Red Sea dealers. skimmer cable...
- Page 14 Installation and Operation Manual Red Sea MAX NANO ® 6.4 Carbon: 3. Insert the Eyeball Seat into the Outlet Holder that is fixed into the glass. This part is a tight fit so that Wash the carbon filter material under running water several times to it will not float out during any pump maintenance remove residual dust.
-
Page 15: Installation Of Automatic Top-Off
Installation and Operation Manual 6.6 Sump Screen: 7 Automatic Top-Off (ATO): Position the sump screen above the front wall of the rear sump. Align the The MAX NANO ATO unit is supplied fully assembled and should not need ® hinges above the clips on the top of the side walls and push firmly into any adjustment before installing on the system however make sure that position. -
Page 16: Installation Of Led Modules
Installation and Operation Manual Red Sea MAX NANO ® 8 Installation of LED Modules Press the ball-seat to the mounting arm, trapping The LED unit for the MAX NANO is attached to the mounting arm by a the ball in between the ®... -
Page 17: Operation Of Pump Switch-Box
Installation and Operation Manual Lower the pin into the hole 9 Operation of Pump Switch-box and when the flat part on the arm is in resting on the The Pump Switch-box is designed to provide easy on/off control of the circulation and skimmer pumps during routine activities such as feeding Pump Switch Box, rotate the arm to the forward... -
Page 18: Led Set Up And Programming
Installation and Operation Manual Red Sea MAX NANO ® 10 LED Set up and programming Acclimation To prevent photo-inhibition due to the high intensity of LED lights, an The LED modules have a built-in Wi-Fi network and must be connected to... -
Page 19: Initial Fill
Installation and Operation Manual 11 Initial Fill 12 Operation of the Protein Skimmer Follow the mixing instructions for mixing your artificial sea water. It is advisable to place any substrate or live rocks in the tank before adding Adjustment of the skimmer will be necessary from time to time due to the water as this will significantly affect the overall volume of water the constant changes in density and organic material in the water. -
Page 20: General Aquarium Maintenance
Installation and Operation Manual Red Sea MAX NANO ® New Skimmers or Set-ups 13 General Aquarium Skimmers only produce foam if the Maintenance water contains the proteins that bind to the surface of the air bubbles and The long-term success and health of the inhabitants of your MAX ®... - Page 21 Installation and Operation Manual Protein skimmer NOTE: If the pump makes mechanical noise after cleaning, replace the impeller. The impeller is a wear item and may need to be Check the foam production in the collection cup and reposition the Skim replaced periodically.
-
Page 22: Trouble Shooting
Installation and Operation Manual Red Sea MAX NANO ® 14 Trouble shooting Q. My set up is new and the skimmer doesn’t seem to be skimming. Q. My set up is not new and skimmer isn’t producing foam or it is too dry and builds on the neck. - Page 23 Installation and Operation Manual Q. The circulation pump is injecting micro-bubbles into the aquarium. skimmer chamber and flow out through the pumps. We strongly recommend NOT using tap water. If you are using tap water DO NOT A. Make sure that you have added freshwater to compensate for add conditioners or de-chlorinators.
-
Page 24: Warranty
15 Warranty Red Sea Aquarium Products Limited Warranty. The limited warranty sets forth all Red Sea Aquatics (HK) Ltd (Red Sea) Some states do not allow the exclusion or limitation of incidental or responsibilities regarding this product. There are no other express or consequential damages, or limitations on how long an implied warranty implied warranties from Red Sea. - Page 25 China North America UK & Ireland Europe Germany & Austria Asia Pacific Red Sea U.S.A & Canada Red Sea Aquatics (UK) Ltd Red Sea Europe Red Sea Deutschland Red Sea Aquatics Ltd Red Sea Aquatics (GZ) Ltd. Block A3, No.33 Hongmian Road,...
- Page 26 Cabinet Installation Guide PRINTING INSTRUCTIONS To print only the Cabinet Installation Guide, print pages 26-29. Red Sea MAX ® NANO...
- Page 27 Cabinet Installation Guide Px2, Yx2 Px2, Yx2 Px4, Yx2...
- Page 28 Cabinet Installation Guide Ox12 Px7, Yx3 Px7, Yx3 Px6, Yx6...
- Page 29 ST3.5 x14 #5940 MAX NANO_v16A Europe UK & Ireland U.S.A Germany & Austria Red Sea Aquatics (GZ) Ltd Block A3, No.33 Hongmian Road, Red Sea Europe Red Sea Aquatics (UK) Ltd Red Sea U.S.A Red Sea Deutschland ZA de la St-Denis...
- Page 30 PRINTING INSTRUCTIONS To print only the Podium Installation Guide, print pages 30-31. ® Red Sea MAX NANO Podium Installation Guide...
- Page 31 Podium Installation Guide B x2 C x2...
- Page 32 Incorrect use of this device could cause bodily injury or death. Smartphones and tablets: ® Read and follow all of the safety guidelines in the Red Sea MAX manual Download the iOS or Android “myAI” apps at: before assembling and/or using this LED module.
- Page 33 AI Prime HD LED Controller settings Spectrum and Intensity The controller provides automatic and manual modes for the lights. Select the “Manual” control option and see the effect of raising/lowering When the “Auto” mode is selected the LED module will vary spectrum and the intensity of individual color channels and the effect of various intensity according to the 24 hour cycle that you program.
- Page 34 AI Prime HD LED Red Sea Hydra 26™ HD LED Day / Night Programing Min & Max Ramp EASY SETUP Sunrise & Sunset Before setting up your 24 hour program refer to the general programming Nite: 0 Day. 118 ®...
- Page 35 AI Prime HD LED To manually add program points to the graph, drag the green bar to the desired time, Right-click to open the color intensity set window for that point, then click on save or close window to exit. Manually adding the moonlight setting to the 24 hour program Moonlight –...
- Page 36 AI Prime HD LED Red Sea Hydra 26™ HD LED Acclimation Button Function To set and activate the acclimation option, click on “EDIT” and then click To reset the LED Module’s network setting, press and hold the button until on the ON/OFF button.
- Page 37 ● Contact Tech support network ● Red + ● Green ● Blue ● Firmware update Thermal cooldown ● Blue ● Green Un-configured state Scan this QR to register & activate your Red Sea Hydra 26 HD LED ™...
- Page 38 China North America UK & Ireland Europe Germany & Austria Asia Pacific Red Sea Aquatics (GZ) Ltd. Red Sea U.S.A & Canada Red Sea Aquatics (UK) Ltd Red Sea Europe Red Sea Deutschland Red Sea Aquatics Ltd Block A3, No.33 Hongmian Road,...
Need help?
Do you have a question about the MAX NANO and is the answer not in the manual?
Questions and answers
Lights not working on Red Sea Max Nano after UK summer time click change
The lights may not be working on the Red Sea Max Nano after the UK summer time change because the lighting schedule is time-based. If the time on the control device (smartphone, tablet, or computer) is not updated to reflect the daylight saving time change, the programmed lighting times may no longer align correctly with the actual time, causing the lights to appear off at expected times. Adjusting the time settings or reprogramming the schedule in the “myAI” app may resolve the issue.
This answer is automatically generated
How do you connect the light to the internet