Table of Contents
Advertisement
Installation
The appliance can be built into a
kitchen run and installed directly next to
a kitchen furniture housing unit. The
appliance front must protrude in front of
furniture fronts by at least 65 mm. This
enables the doors to be opened and
shut without being obstructed. To
match the height of the rest of the
kitchen, the appliance can be fitted with
a suitable top box .
When installed next to a wall a
distance of at least 40 mm must be
maintained on the hinge side between
the wall and the appliance .
The larger the ventilation gap, the
more economically the compressor
will work.
– A ventilation gap of at least 50 mm
depth must be provided at the back
of the appliance behind the whole
width of the top box for air to
circulate.
– The cross-section of the air inlet and
outlet under the ceiling must be at
2
least 300 cm
circulate without obstruction.
60
to ensure that air can
Hide quick links:
Advertisement
Table of Contents
