Leave-Factory Configuration Table - madcom SMB32 User Manual

LAN
PC
ERROR
Card status
LED (32 LEDs)
Reset button: The reset button is used to restart the system
quickly.If you want to clear the system configuration, press and
hold the Reset button for 15 seconds, and all the configurations
will reset to the leave-factory settings.

5. Leave-factory configuration table

Item
Login user name
LAN port status
PC port status
Error indication
SIM card
Leave-factory
configuration
admin
When it flashes at twice
per second, it indicates
normal operation.
Network connection
status of LAN port
When it flashes, it
indicates there is data
transfer.
Network connection
status of PC port
When it flashes, it
indicates there is data
transfer.
When it flashes, it
indicates device error.
When there is SIM card
error, the red LED
flashes. When you press
the switch to replace the
SIM card, the red LED
will be on, indicating that
the replacement can be
conducted. When you
press the button for
confirmation after
replacement, the red
LED will be off.
Configuration range