Summary of Contents for madcom SMB32
- Page 1 User Manual for SMB32 Remote SIM Card Controller SMB32 Version: 1.0 2011-8-30 To protect the environment, please use electronic file to print the pages you need.
-
Page 2: Table Of Contents
Contents Important notice Unpacking list Basic function introduction Connection and installation 5. Leave-factory configuration table 6. Starting configuration 7. Precautions 8. Hardware and software characteristics... -
Page 3: Important Notice
Important notice This product and its accessories have realized the separation of the SIM card and the SIM related device, which will make the physical address of the identity represented by the SIM unidentifiable. Please check carefully if the use of this product is permitted by the local laws. -
Page 4: Unpacking List
Unpacking list Please check if the following products or accessories are available when you receive the shipment. 12V 2A transformer ×1 Host ×1 CAT5 network cable ×1... -
Page 5: Basic Function Introduction
SIM connecting device to realize the remote separation of card and equipment. SMB32 can control 32 SIM cards at the same time and offers such functions as hot plugging, quick online SIM exchange and timed exchange planning. The use of SMB32 and the... - Page 6 GoIP4 As shown in the above figure, several GoIP devices (up to 32 ways) can be connected to the SMB32 through Internet. The SIM cards installed with the devices are all integrated to the SMB32 to be controlled and scheduled by the latter.
- Page 7 GoIP4(1) GoIP4(2) SMB32(1) Internet GoIP4(n) SIM Server SMB32(n) More than 10,000 SIM cards can be collectively scheduled and managed via the SIM Server. The planned tasks are allocated by the SIM Server (SIM Bank mode: client mode) 3. Exchange logic (independent SIM Bank)
- Page 8 GoIP4(1) Slots 1-4 GoIP4(2) Slots 5-8 Slots 29-32 SMB32 GoIP4(8) The card numbers of the remote-end devices corresponding to the cards on the “schedule mode = fixed mode” slots...
-
Page 9: Connection And Installation
Zone Zone 2 SMB32 When schedule mode is used (schedule mode = schedule), devices of different zones will automatically exchange their SIM cards when it is time for schedule, so as to realize the automatic roaming of SIM cards. When this configuration is used, chaos mode is adopted for the relationship between the SIM cards and the remote-end devices. - Page 10 PC or other shared PC in the network to the PC port. The LAN port can be connected to the ADSL Modem, Switch or Ethernet private lines. The SMB32 supports fixed IP and IP acquisition through DHCP and PPPoE.
-
Page 11: Leave-Factory Configuration Table
When it flashes at twice per second, it indicates normal operation. LAN port status Network connection status of LAN port When it flashes, it indicates there is data transfer. PC port status Network connection status of PC port When it flashes, it indicates there is data transfer. -
Page 12: Starting Configuration
600 minutes Less than 65533 6. Starting configuration 1) Logging on SMB32 Method 1: Set the IP of the PC connecting to the PC port as 192.168.8.x (x=2-254). Type 192.168.8.1 into the browser address card, and the following login box will appear. - Page 13 2) Setting network: Network setting is important for ensuring the normal and stable operation of SMB32. The best environment for network connection is the private line with static IP, second to which is the dynamic public IP (e.g., ADSL, broadcast and television network).
- Page 14 The DDNS service is the dynamic IP address resolution service provided by DBLTEK for free. When this function is used, any SMB32 device can use the IMEI number as the domain name and acquire the callee’s IP through the DNNS server (both...
- Page 15 4) Setting operation mode: SMB32 has two operation modes: server mode and client mode. Under server mode, the SMB32 works as the server of the remote-end device, which logs on the SMB32 to realize the SIM connection. Under client mode, the SMB32 logs on the SIM server, and all the SIM connections are scheduled and managed by the server.
- Page 16 Under the server mode, the best working environment of the SMB32 is to use the fixed public network IP. If the intranet IP is used, the router DMZ...
- Page 17 When the fixed mode is used, select the “fixed” mode, and fill in the unit code (i.e., the login user name, only English letters can be filled in), zone code (only Arabic digits can be filled in) and login password of the remote-end device. Select the number of lines of the device.
-
Page 18: Precautions
7. Precautions 1) SIM card replacement When replacing the SIM card in live condition, press the button under the slot. When the red LED is on, it indicates that the replacement can be conducted (when the red LED is on, the SIM will be disconnected, no matter the card is in use or not). - Page 19 SMB32. 5) Software upgrade To upgrade software, please contact your supplier to obtain the latest software upgrade connection, enter the connection into the upgrade address field of the SMB32, and then press the “start” button. Please note that the...
-
Page 20: Hardware And Software Characteristics
power supply cannot be disconnected during the upgrade. 8. Hardware and software characteristics 1. Mechanical characteristics and operating environments Outline dimensions: 285×142×42mm Host net weight: 680g Storage environment temperature: -40 ℃ - 80℃ Operating environment temperature: 0℃-40℃ Operating environment humidity: <90%, no condensing Maximum power consumption: 10 W 2. - Page 21 System Parameters Item Description Remarks Operating system Linux Version: 2.6 SIM card standard 3.3V GSM11.11 Network protocol IP, TCP, UDP, HTTP, ICMP, DHCP CL & SRV, NTP, TFTP, ToS, telnet Worst network Packet loss rate <5%, network time delay <300ms environment One-way SIM peak 11KBPS...