Dtt35 Design, Dimensions For Process Connections - Endress+Hauser Flowphant T DTT31 Technical Information

DTT31, DTT35
DTT35 design, dimensions for
process connections
MB
L
SW/AF 22
1
G½"
Weight
Material
Endress+Hauser
Ø 43.5 (1.71)
Ø 50.5 (1.99)
Ø 50 (1.97)
Ø 66 (2.6)
All dimensions in mm (in)
L = insertion length (see ordering information DTT35, Pos. 070)
Item No. Process connection versions DTT35 (see ordering information DTT35, Pos. 070)
MB Conical metal-metal for hygienic processes, G½" thread. Suitable welding boss available as an accessory.
Thread length L
1
DB Clamp 1" up to 1½" (ISO 2852) or DN 25 up to DN 40 (DIN 32676)
DL Clamp 2" (ISO 2852) or DN 50 (DIN 32676)
LB Varivent F DN25-32, PN 40
LL Varivent N DN40-162, PN 40
HL APV inline, DN 50, PN 40, 316L, (B = 6 x Ø8.6 bores + 2 x M8 thread)
PL DIN 11851, DN50, PN40 (including coupling nut)
PG DIN 11851, DN25, PN40 (including coupling nut)
PH DIN 11851, DN40, PN40 (including coupling nut)
approx. 300 g (10.6 oz), depends on sensor length and process connection
• Process connection: AISI 316L
Surfaces in contact with process in hygienic version with surface quality R
Coupling nut: AISI 304
• Housing: AISI 316L, with surface quality R
O ring between housing and sensor modul: EPDM
• Electrical connection:
M12 connector: exterior AISI 316L, interior polyamide (PA)
Valve plug: outer polyamide (PA)
M12 connector: exterior 316L
Cable outer covering: polyurethane (PUR)
O ring between electrical connection and housing: FKM
DB (CLAMP 1") DL
Ø 56.5 (2.22)
Ø 64 (2.52)
LB (Varivent F)
Ø 68 (2.68)
Ø 84 (3.31)
PL (DIN 11851)
PG
Ø 27 (1.06)
Ø 51 (2.01)
Ø 68 (2.68)
Ø 44 (1.73)
= 14 mm (0.55 in)
≤ 0.8 μm (31.5 μin)
a
(CLAMP 2")
LL (Varivent N) HL
B
Ø 61.5 (2.42)
Ø 82 (3.23)
Ø 100 (3.94)
(DIN 11851) PH
Ø 39 (1.54)
Ø 56 (2.21)
≤ 0.8 μm
a
(APV-Inline)
(DIN 11851)
T09-DTT35xxx-06-xx-xx-yy-000
11