Mobile Version - Positive Grid BIAS DISTORTION Product Manual

Mobile Version

1 2 3 4
8
9 10 11
27
5 6 7
15
16
12 13 14
1. ToneCloud -
Enters the ToneCloud page.
2. Effects page -
Switches among installed software packs. Available software packs include
Distortion Pack, Delay Pack and Modulation Pack.
3. Preset menu -
Shows the current preset. Press to open the preset menu.
4. Save button -
See the Save Preset section of this manual for more information.
5. In app purchase -
Buy full-featured version of BIAS Pedal.
6. Setting Menu -
See the Settings section of this manual for more information.
7. Tooltip -
Helpful tips explaining each button and knob.
8. Signal Path -
See the Signal Path section of this manual for more information.
9. Input volume -
Controls the input volume. To prevent feedback, the input volume will be
muted at startup when using a built-in microphone and speaker as the chosen audio
input/output device.
10. Tempo -
Shows the current BPM value. You can set the BPM by entering the desired value
or by using the built-in tap tempo feature. The BPM range goes from 40 to 400.
11. Quick Snap -
Provides 8 slots to save and instantly recall different parameter setups for
instant comparison of different settings.
12. Noise Gate -
See the Noise Gate section of this manual for more information.
13. Amp Room -
See the Amp Room section of this manual for more information.
14. Output volume -
Controls the output volume.
15. Design button -
Customize the look of your pedal. See the Custom Panel section of this
manual for more information.
16. Open in BIAS FX -
Import current pedal to BIAS FX. Needs BIAS FX mobile.
28