Table of Contents
Advertisement
FIRST USE
1. SET THE TIME
You will need to set the time when you switch on the
appliance for the first time: press
the two digits for the hour start flashing on the display.
Use
or
to set the minutes and press
The two digits for the minutes will start flashing. Use
or
to set the minutes and press
Please note: When the
icon is flashing, for example
following lengthy power outages, you will need to reset the
time.
DAILY USE
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: the display will
light up and an audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
Please note: During cooking you can change the function
by turning the selection knob or adjust the temperature by
turning the thermostat knob. The function will not start if
the thermostat knob is on . You can set the cooking time,
cooking end time (only if you set a cooking time) and a
timer.
AUTOMATIC
To start the automatic function you have selected
("Bread" or "Dessert"), keep the thermostat knob at the
position for automatic functions ( ).
To finish cooking, turn the selection knob to position .
Please note: You can set the cooking end time and timer.
RISING
To start the "Rising" function, turn the thermostat knob
to the relevant symbol; if the oven is set to a different
temperature, the function will not start.
until the
icon and
to confirm.
to confirm.
2. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore recommend
heating the oven with it empty in order to remove any
possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 250 °C for about one hour, preferably
using the "Maxicooking" function. The oven must be
empty during this time.
Follow the instructions for setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3. PREHEATING
Once the function starts, an audible signal and
a flashing icon on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the fixed
icon on the display will indicate that the oven has
reached the set temperature: at this point, place the
food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.
. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing
until the
flashing on the display.
Use
or
to set the cooking time you require and then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete.
Please note: to cancel the cooking time you have set, keep
pressing
until the
icon starts flashing on the display,
then use
to reset the cooking time to "00:00".
This cooking time includes a preheating phase.
EN
icon and "00:00" start
3
Advertisement
Table of Contents
