Recording An Image From A Tape As A Still Image - Sony Handycam DCR-TRV520 Operating Instructions Manual

Recording an image from a tape as a still
image
Your camcorder can read moving image data recorded on a tape in the Digital8
system, and record it as a still image on a "Memory Stick."
Your camcorder can also take in moving image data through the input connector and
record it as a still image on a "Memory Stick."
Before operation
Insert a tape recorded in the Digital8
camcorder.
(1) Set the POWER switch to VTR.
(2) Press N. The image recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the image from the tape freezes.
CAPTURE appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the "Memory Stick". Recording is complete when the bar scroll indicator
disappears.
2
PLAY
REW
3
When the acccess lamp is lit or flashing
Never shake or strike the unit. Also do not turn the power off , eject the "Memory Stick"
or remove the battery pack. Otherwise, an image data breakdown may occur.
If appears on the LCD screen or in the viewfinder
The inserted "Memory Stick" is imcompartible with your camcorder because its format
does not comform with your camcorder. Check the format of the "Memory Stick".
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record the audio from a tape.
Titles superimposed on tapes
You cannot record the titles on the "Memory Stick." However, you can record titles
which have already been recorded on tapes.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
system and a "Memory Stick" into your
FF
CAPTURE
1
4
85