Cisco UCS 5100 Configuration page 4
Kvm console access
Hide thumbs
Also See for UCS 5100:
- Setup (17 pages) ,
- Firmware manual (10 pages) ,
- Upgrade instructions (10 pages)
Advertisement
Power−A /org/ip−pool/pooled #commit−buffer
Power−A /org/ip−pool/pooled #
Power−A /org/ip−pool/pooled #show detail
Pooled:
IP Address: 10.193.35.200
Subnet: 255.255.255.0
Def Gw: 10.193.35.1
Assigned: Yes
Assigned To: sys/chassis−1/blade−2/mgmt/ipv4−pooled−addr
Power−A /org/ip−pool/pooled #
Verify
Complete these steps in order to verify KVM console access has been configured correctly:
1.
In the navigation pane, click the Equipment tab.
2.
Expand any chassis on which the blade is installed.
3.
Expand the Servers tab.
4.
Select the blade server.
5.
Click the General tab, and then click KVM Console.
The KVM console should successfully connect to the blade server as shown in this image:
Advertisement
