FirsTime Espresso Grandfather Clock Instruction Manual page 5

5. Slip the pre-hinged front door into place by lowering it over the
matching hinge on the right side panel (Figure C). Take your time
lining up both parts slowly and it will drop into position. Insert hinge
pins into hinges.
6. Carefully fit the TOP UNIT down onto the side panels. Be sure to keep
the side panels straight while working (Figure D). Attach the top unit
with the four remaining screws and washers in the same manner as the
side panels.
NOTE: At this point the cabinet is assembled.
7. How to hook the weights:
Hook the WEIGHTS on the end of the CHAINS located on the bottom
inside edge of the top unit.
8. The clock can be aligned and made vertical through adjusting the four
feet at the bottom.
5