Download Print this page

FirsTime 31064 Instruction Manual

Shiplap grandfather clock

Download this manual

INSTRUCTION

MANUAL

31064 Shiplap Grandfather Clock

Need help?

Do you have a question about the 31064 and is the answer not in the manual?

Page 1 INSTRUCTION MANUAL 31064 Shiplap Grandfather Clock...
Page 2 SIDE PANEL(B) BACK PANEL (D)
Page 3 carefully designed and crafted to give you years of dependable operation. Read this booklet thoroughly before assembling and operating your clock in order to become familiar with its many features and assure proper performance. Keep these instructions in a safe place for future reference. ATTENTION In order to ensure that your clock is stable, adjust the levelers at the bottom of the to the top of the clock and must be attached to the wall.
Page 4 3. While facing the front of the BASE UNIT (G), fit SIDE PANEL B into the grooves on the left side of the clock base and attach it from the inside with SCREWS and the FLAT WASHERS using a Phillips head screwdriver. See Figure 1.
Page 6 TIME AND CHIME SETTING: This timepiece plays a Westminster chime melody on the hour and has an automatic shut-off. The clock does not chime between 10:00 pm and 6:00 am. To ensure that your clock functions correctly, please follow the time and chime setting precisely.
Page 7 6. When replacing batteries remember that all the prior must be repeated from point one. i. e. the clock must be started again at 6:05 am. Therefore, please do not throw these instructions away as by the time the batteries have to be replaced, you may have forgotten how to set the clock.