Advertisement
Quick Links
These instructions apply to the external field installation of Belimo actuators on Greenheck model VCD Control Dampers when
they are duct mounted or sleeved. For severe enivornment actuator kits, reference page 3 & 4.
Item
Part No.
Qty
1
1
2
723092
1
3
815027
1
4
415475
4
5
415455
4
6
415586
4
7
416122
1
8
415385
1
WARNING
!
Equipment Damage or Electrical Power Hazard. Line voltage can cause death or serious injury and short
equipment circuitry. Disconnect power supply before installation.
CAUTION
!
!
Device Malfunction Hazard. Improper set screw tightening causes device malfunction. Tighten set screws
with proper torque to prevent damper shaft slippage.
Tools Required:
Wrenches:
(1)
/
in., (1)
3
7
8
Description
Belimo actuator
Anti-rotation bracket
Standoff bracket
1/4 -20 x 1/2" bolt
1/4-20 spinlock nut
#14 TEK screw
Anti-rotation pin
Keps hex nut zp.
Installation Instructions
Belimo Actuators Direct Drive Series
(AMB, FSLF, LF, LMB, NMB, TF)
/
in., and (1) 10mm
16
Part number 468753
UL Listed Direct Drive Actuator
Advertisement
Related Manuals for Greenheck Belimo Actuators Direct Drive Series
Summary of Contents for Greenheck Belimo Actuators Direct Drive Series
- Page 1 (AMB, FSLF, LF, LMB, NMB, TF) UL Listed Direct Drive Actuator These instructions apply to the external field installation of Belimo actuators on Greenheck model VCD Control Dampers when they are duct mounted or sleeved. For severe enivornment actuator kits, reference page 3 & 4.
- Page 2 Instructions: 3. Slide the actuator and the mounting bracket (item 2) onto the damper shaft. Mount the mounting bracket These installation instructions assume the damper is already (item 2) to the stand off bracket (item 3) using (4) mounted in a duct or sleeve with the damper shaft extending in.-20 x in.
- Page 3 Severe Environment (316SS) These instructions apply to the external field installation of Belimo actuators on Greenheck model SEVCD Control Dampers when they are duct mounted or sleeved Tools Required: Wrenches: in., (1) in., and (1) 10mm Item Part No. Description...
- Page 4 Inspect the damper blades and the damper shaft to determine the proper damper shaft rotation for the desired blade fail position. Copyright © 2010 Greenheck Fan Corporation 468753 Belimo IOM Rev. 5 February 2010...