Tennant S20 Gas Operator's Manual
  1. Manuals
  2. Brands
  3. Tennant Manuals
  4. Blower
  5. S20 Gas
  6. Operator's manual

Tennant S20 Gas Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S20
(Gas/LPG)
Sweeper
English EN
Operator Manual
9007261
Rev. 01 (08-2011)
*9007261*
www.tennantco.com
Home
Find... Go To..

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S20 Gas and is the answer not in the manual?

Questions and answers

Darryl
May 13, 2025

I want to know what's the part name that attached to the chef and the top of the cybrone adapter.

0

Related Manuals for Tennant S20 Gas

Summary of Contents for Tennant S20 Gas

  • Page 1 (Gas/LPG) Sweeper English EN Operator Manual 9007261 Rev. 01 (08-2011) *9007261* www.tennantco.com Home Find... Go To..
  • Page 2 Specifications and parts are subject to change without notice. Original instructions, copyright E 2010, 2011 TENNANT Company, Printed in The Netherlands. All rights reserved DECLARATION OF CONFORMITY FOR MACHINERY (according to Annex II A of the Machinery Directive) Herewith declares, on our own responsibility, that the machinery TENNANT N.V.

  • Page 3: Table Of Contents

    Replacing The Hopper Dust Filter ..Cleaning The Hopper Dust Filter ..Cleaning The Cyclone Assembly ..S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 4: Safety Precautions

    - - Report machine damage or faulty operation immediately. 5. Before leaving or servicing machine: - - Stop on level surface. - - Set parking brake. - - Turn off machine and remove key. S20 Gas / LP 9007261 (8- -11) Home Find... Go To..
  • Page 5 - - Use truck or trailer that will support the weight of the machine. - - Set parking brake after machine is loaded. - - Block machine tires. - - Tie machine down to truck or trailer. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 6 HOPPER LIFT ARMS LABEL - - Located on both hopper lift arms. HEARING PROTECTION LABEL - - Located only on machines with cab option. 354902 S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 7 Located on the side of the operator compartment. RAISED HOPPER LABEL - - Located on the hopper lift arm. VACUUM WAND LABEL - - Located on the optional vacuum wand. 354902 S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 8: Operation

    MACHINE COMPONENTS 1. Operator seat 6. Brush door 2. Steering wheel 7. Fuel tank 3. Instrument panel 8. Hopper access door 4. Hopper cover 9. Main cover 5. Side brush S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 9: Controls And Instruments

    13. Engine water temperature light (Dual side brush option only) 14. Charging system light 30. Main cover lever 15. LPG fuel level low light 16. Engine oil pressure light S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 10: Symbol Definitions

    Hopper door open Hopper door close (lever) Main brush down and on Start Main brush up and off Horn Battery charging system Operating lights Engine oil pressure Hazard light S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 11 Side brush down and on Side brush up and off Side brush pressure Engine choke (Gasoline Only) Unleaded fuel only Parking brake Brush pressure (Increase) Brush pressure (Decrease) Turn counterclockwise Turn clockwise S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 12: Operation Of Controls

    PARKING BRAKE LIGHT Press the Brake pedal to stop the machine. The parking brake light comes on when the parking brake is engaged. Release the parking brake before operating the machine. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 13: Main Cover Lever

    SIDE BRUSH PATTERN section of this manual. NOTE: The side brush adjustment knob can be repositioned. Lift the knob, turn it to the desired position, and release it. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 14: Charging System Light

    Vacuum fan off position. If this happens, stop the machine, eliminate the source of the heat, and return the lever to the Vacuum fan on position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 15: Lpg Fuel Level Low Light

    The clogged hydraulic filter light comes on when Contact a TENNANT service representative. the hydraulic filter is clogged. If this light remains on, have the hydraulic filter changed as soon as possible. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 16: Fuel Level Gauge

    Operating lights on: Press the top part of the LP tank level gauge. switch. Operating / Hazard lights on (Optional): Press the bottom part of the switch. Off: Place the switch in the middle position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 17: Deluxe Suspension Seat

    SEAT BELTS FOR SAFETY: Before starting machine, adjust seat and fasten seat belt (if equipped). The backrest adjustment knob adjusts the angle of the backrest. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 18: Brush Information

    - Check all lights for proper operation. - Check all controls for proper operation. - Check hopper skirt and brush compartment skirts for damage and wear. - Check the service records to determine maintenance requirements. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 19: Changing The Lpg Tank

    9. Open the tank service valve slowly and check for leaks. Close the service valve immediately if an LPG leak is found, and tell the appropriate personnel. 350412 350412 S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 20: Starting The Machine

    NOTE: Do not operate the starter motor for more than 10 seconds at a time or after the engine has started. Allow the starter to cool between starting attempts or damage to the starter motor may occur. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 21: Home Find... Go To

    7. Move the throttle lever all the way forward into the Fast engine speed position. 8. Release the machine parking brake. 9. Drive the machine to the area to be cleaned. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 22: Stop The Machine

    6. LPG powered machines: Close the LPG tank’s liquid service valve. 3. Move the throttle lever back into the Idle engine speed position. 350412 4. Set the machine parking brake. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 23: While Operating The Machine

    The maximum rated incline is 10_ or 17.6% with a full hopper and 14_ or 25% with an empty hopper. FOR SAFETY: When using machine, do not raise hopper when machine is on an incline. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 24: Sweeping

    If this happens, stop the machine, eliminate the source of the heat, and return the lever to the Vacuum fan on position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 25: Stop Sweeping

    Filter shaker 7. Sweep as needed. position for 30 seconds. STOP SWEEPING 1. Place the side brush lever in the right Side brush up and off position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 26: Emptying The Hopper

    Make sure adequate clearance is available before raising hopper. NOTE: Be aware that the minimum ceiling height needed to high dump the hopper is 2490 mm (98 in). S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 27 FOR SAFETY: When using machine, use care when reversing machine. 10. Push and hold the hopper raise / lower lever forward to lower the hopper. Release the lever into the Hold position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 28: Engaging Hopper Support Bar

    3. Move the throttle lever all the way forward into the Fast engine speed position. WARNING: Raised hopper may fall. Engage hopper support bar. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 29: Disengaging Hopper Support Bar

    Fast engine speed position. 8. Shut the machine off. 3. Pull and hold the hopper raise / lower lever back and raise the hopper slightly. Release the lever into the Hold position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 30 5. Push and hold the hopper raise / lower lever forward to lower the hopper. Release the hopper lever into the Hold position. 6. Move the throttle lever back into the Idle engine speed position. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 31: Options

    8. Start the engine. 9. Move the throttle lever all the way forward into the Fast engine speed position. 5. Connect the vacuum hose to the vacuum wand. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 32: Tower Bumpers

    17. Disconnect the vacuum hose from the vacuum wand. 18. Put the vacuum wand in the mounting clips and the hose into the storage compartment. 19. Close the hopper cover. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 33: Machine Troubleshooting

    Contact TENNANT representative for recommendations Hopper lip skirts worn or damaged Replace lip skirts Side brush drive failure Contact TENNANT service personnel Main brush drive failure Contact TENNANT service personnel S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 34: Maintenance

    LUBRICANT/FLUID ..Engine oil, 10W30 SAE--SG/SH only. HYDO TennantTrue premium hydraulic fluid or equivalent . . . Water and ethylene glycol anti-freeze, --34_ C (--30_ F) S20 Gas / LP 9007261 (8- -11) Home Find... Go To..

  • Page 35: Hydraulics

    ATTENTION! Hydraulic components depend on system hydraulic fluid for internal lubrication. Malfunctions, accelerated wear, and damage will result if dirt or other contaminants enter the hydraulic system. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 36: Engine

    FOR SAFETY: When servicing machine, wear eye and ear protection when using pressurized air or water. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 37: Fuses

    FU16 Not Used FU17 Not Used FU18 Not Used FU19 Not Used FU20 Not Used NOTE: Always replace a fuse with a fuse of the same amperage. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 38: Hopper Dust Filter

    5. Clean dust and debris from the dust filter tray. prop rod. 6. Reinstall the dust filter. 2. Remove the dust filter cover. 7. Reinstall the dust filter cover. 8. Close the hopper cover. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 39: Cleaning The Hopper Dust Filter

    3 mm (0.13 in) and never hold the nozzle closer than 50 mm (2 in) to the filter. FOR SAFETY: When servicing machine, wear eye and ear protection when using pressurized air. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 40: Main Brush

    2. Open the right side main brush access door. 3. Loosen the brush idler plate T--bolt. Remove the brush idler arm assembly. 8. Close the main brush access door. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 41: Adjusting The Main Brush Width

    6. Secure the pin by clipping the pin keeper over the end of the pin. 7. Adjust the side brush pattern with the side brush down pressure knob. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 42: Adjusting The Side Brush Pattern

    The side brush bristles should touch the floor in the patterns shown in the illustration. 350327 Turn the knob(s) counterclockwise to increase the brush pressure and clockwise to decrease the brush pressure. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 43: Skirts

    MAINTENANCE SKIRTS Check the skirts for wear or damage daily. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 44: Pushing, Towing, And Transporting The Machine

    The illustration shows the bypass valve in the pushing or towing position. Return the bypass valve to the normal position when through pushing or towing the machine. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 45: Machine Jacking

    The rear jacking location is the center of the rear bumper behind the back tire. Front jacking locations are located on the frame directly in front of the front tire. S20 Gas / LP 9007261 (1- -10) Home Find... Go To..

  • Page 46: Specifications

    2113 mm (83.2 in) Minimum turning radius, left 1625 mm (64 in) Maximum rated incline with empty hopper 14_ / 25% Maximum rated incline with full hopper 10_ / 17.6% S20 Gas / LP 90007261 (1- -10) Home Find... Go To..

  • Page 47: Machine Dimensions

    SPECIFICATIONS MACHINE DIMENSIONS 1230 mm (48.5 in) TOP VIEW 2085 mm (82.1 in) 1260 mm (49.5 in) 2090 mm FRONT VIEW (82.3 in) SIDE VIEW 354901 S20 Gas / LP 9007261 (1- -10) Home Find... Go To..
  • Page 48 SPECIFICATIONS S20 Gas / LP 90007261 (1- -10) Home Find... Go To..

This manual is also suitable for:

S20 lpg

Table of Contents