Sony Handycam DCR-SR200E Operating Manual page 8

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-SR200E:
Table of Contents

Advertisement

To charge the battery pack using only
the AC Adaptor
Turn the POWER switch to OFF (CHG), then
connect the AC Adaptor directly to the DC
IN jack on the camcorder.
POWER
switch
DC plug
Open the jack
cover
Available running time for the
supplied battery pack
Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Recording/Playback time:
Approximate time (min.) available when you
use a fully charged battery pack.
NP-FH40:
Charging time
1
Recording time
*
Continuous
recording time
Typical
4
recording time
*
Playback time
8
DC IN jack
(Unit:min.)
DCR-SR52E/
DCR-SR32E/
SR62E/
SR42E
SR72E/SR82E
125
125
90*
105
100*
45*
50
50*
120
110*
NP-FH60:
Charging time
Recording time
Continuous
recording time
Typical
recording time
Playback time
1
*
When [REC MODE] is set to [SP].
2
*
When the LCD backlight turns on.
3
*
When the LCD backlight turns off.
4
*
Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.
On the battery pack
• Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the DC
IN jack of your camcorder or the Handycam
Station, even when the mains lead is disconnected
from the wall socket.
On the charging/recording/playback time
• Times measured when using the camcorder at
25°C (77°F) (10°C to 30°C (50°F to 86°F) is
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
2
which you use your camcorder.
3
On the AC Adaptor
• Use the nearby wall socket when using the AC
2
Adaptor. Disconnect the AC Adaptor from the
3
wall socket immediately if any malfunction
2
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
(Unit:min.)
DCR-SR190E/
DCR-SR290E/
SR200E
SR300E
135
135
1
*
2
115*
100*
3
125*
105*
2
55*
3
4
60*
*
2
165
160
*
(Still) lamp (p.9).
2
3
2
50*
3
50*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents