Crown CV VIEW User Manual page 14

MAINTENANCE
2.link the cables as the picture
Connect the Negative
electrode of Controller
Connect the switch of DC power
WARNING
When the battery is installed: be careful discharging wire and hang it, ensure
that the cross poles; when removing, first remove the motor controller is
negative (-), and install it as the final step of the installation. Do not screw too
tight, too vigorously can damage the battery casing and Terminal.
23
MAINTENANCE
MAINTENANCE
BRAKE SYSTEM ADJUSTMENT
CAUTION
1. This vehicle has 4 wheel hydralic disc
brake
2.The brake distance is less than 4
meters(unload)
3. If the brake distance is more than 4 m
,pls check the abrasion of the wheel
friction piece . if the thickness of the
brake piece is less than 2mm then you
need to change a new one, if not, then
you need to adjust the screws accom-
pay with the brake wire.
4. If the brake not work or not working
well,pls check if it's used up the brake
oil or ask the technician for further
help!
24