I.D. Systems Vehicle Asset Communicator User Manual page 25

1
Authorized User:
>OSHA<
2
3
I.D. Systems, Inc. One University Plaza, Hackensack, NJ 07601
Tel: 201-996-9000; Fax 201-996-9144; email:
After a successful login, the VAC screen will show
The first checklist question will then appear, with
LED that will flash to remind operators and nearby
Available responses along bottom line of screen,
(>> indicates more responses available by scrolling
Press right or left arrow keys to change *selection*
Press ENTER key to confirm current selection and
checklist has been completed successfully, and the
completion will not fulfill the OSHA requirement
To resume working on the checklist, press the right
arrow key to select *No* and then press ENTER.
support@id-systems.com
this message. If OSHA questions have not been
completed, >OSHA< will continually flash.
The operator should simply press the "CHECK"
button.
multiple-choice responses.
Note: some vehicles are also configured with an
personnel that the checklist is unfilled.
OSHA vehicle checklist screens:
Question # / of total # of questions.
Text of question.
separated by ⎢ characters
with right arrow key).
Asterisked *selection* shows selected response.
proceed to the next question.
Press ESC to go back one question.
When the last question has been answered, the
screen will indicate: - OSHA complete! –
If operator tries to exit checklist before it is
complete (by pressing the ESC key), the screen
will show this message. Exiting prior to
and responses will be lost.
To exit the checklist, operator chooses *Yes* by
pressing ENTER.
Installation
000-0144-01
Page 25 of 41