Table of Contents
Advertisement
Security
Change Lock
(Menu 8-2)
You can change your current lock code to a new
one. The lock code is preset to "0000" or "1234"
at the factory.
Note: Different code may apply for different service
providers. Consult your local provider or
vendor for details
Enter a new four-digit lock code, and your phone
prompts you to enter the code again. Re-enter the
lock code.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write
the lock code down or memorize it if you have
changed.
Restriction
(Menu 8-3)
This feature allows you to restrict all your
outgoing calls. You cannot make any call, except
for emergency calls (see below).
Select On to use the call restriction feature or Off
to release the feature.
Emergency #
(Menu 8-4)
Your phone provides the option of storing
emergency numbers. These numbers can be
manually dialed at any time, even though your
phone is locked or all outgoing calls are restricted.
You can store up to three emergency numbers.
88
To store an emergency number:
1. Select a location using a numeric key,
, followed by
.
2. Enter the required number. Each number can
be up to 32 digits long.
If there is a number already stored, delete the
number using
.
3. Press
to save the number.
To make an emergency call in Lock mode, simply
enter a emergency number, then press
Erase Contacts
(Menu 8-5)
This menu allows you to erase all the numbers in
the Contacts.
When a confirming message displays, press
to clear the memory.
Reset Phone
(Menu 8-6)
Resetting the phone erases all of your saved
options and information and returns them to the
factory default settings, except for the Contacts
entries and SMS messages.
When a confirming message displays, press
to reset the phone.
The phone turns itself off and back on, restores
the default settings, and then returns to Standby
mode.
Security
or
.
89
Advertisement
Table of Contents
