Call Functions; Making A Call - Samsung SPH-N345 User Manual

Getting Started
Power Save Mode
Your phone comes with a Power Save feature that
will automatically be activated if your phone is
unable to find a signal after 15 minutes of
searching. While this feature is active, the phone's
battery charge is conserved. The phone will
automatically recheck for a signal periodically. To
manually force the phone to recheck for a signal,
press any key. A message on the display lets you
know when your phone is operating in Power Save
mode.
Key Lock Mode
You can lock the keypad by pressing and holding
in Standby mode. By doing this, you can
prevent accidental key pressing.
To unlock the keypad, press and then
Key Lock icon ( ) displays in the display.
When you have an incoming call or the alarm goes
off while in Key Lock mode, the mode is
automatically deactivated and the phone goes to
Standby mode.
Note: You can set the phone to automatically lock the
keypad after a specified period of time, in the
Auto Key Lock menu (Menu 7-1). See
page 83.
22
. The

Call Functions

Making a Call

In Standby mode, key in the area code and phone
number and press .
When entering a number, pressing
to insert a pause or a hyphen. For more details
about pause dialing, see page 27.
Note: If you have activated Auto Retry menu
(Menu 7-4), the phone will automatically retry
to make the call when the line is busy or the
remote person does not answer you.
Correcting the Number
To clear the Press
last digit displayed .
whole display for more than one
second.
Ending a Call
When you want to finish your call, briefly press
The call time, the length of the call, displays briefly
and the phone returns to Standby mode.
allows you
.
23