Displaying The Screen Indicators; Displaying The Date/Time And Camera Settings Data - Data Code - Sony DCR-HC30/HC40 Operation Manual

To cancel the operation
Touch [END].
b Notes
• You cannot use Tape PB zoom together with:
– Digital effect
– Picture effect ([PICT. EFFECT])
• You cannot magnify externally input pictures. Also,
you cannot output the magnified pictures via the
DV Interface.
z Tip
• If you press DSPL/BATT INFO during the playback
zoom operation, the frame will disappear.

Displaying the screen indicators

You can choose to display the time code, tape
counter, and other information on the screen.
Press DSPL/BATT INFO.
The indicator switches on or off as you press the
button.
z Tip
• You can display the screen indicators during
playback on a TV. Select the
SET) menu, [DISPLAY], then [V-OUT/PANEL]
(p. 87).
Displaying the date/time and
camera settings data – Data code
During playback, you can view the date/time
data and the camera settings data
([CAMERA DATA]) that are automatically
recorded while recording pictures on a tape or
a "Memory Stick Duo."
1
2
3
(STANDARD
4
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Touch during playback or
playback pause.
Touch [DATA CODE].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
(STANDARD SET) menu.
60min 0:00:00:00
DATA CODE: OFF
DATE/
OFF
TIME
CAMERA
DATA
Select [CAMERA DATA] or [DATE/
TIME] then touch
60min 0:00:00:00
AUTO
100 AWB
F3. 4 0dB
P-MENU
.
,continued
57
Playback