Step 5: Using The Touch Panel; Changing The Language Setting; Checking The Screen Indicators (Display Guide) - Sony Handycam DCR-HC26 Operating Manual

Step 5: Using the touch panel

You can play back recorded pictures
(p. 25), or change the settings (p. 34) using
the touch panel.
Place your hand on the rear side of
the LCD panel to support it. Then,
touch the buttons displayed on the
screen.
DISP/BATT INFO
Touch the button on the LCD screen.
• Perform the same actions as explained above
when you press the buttons on the LCD frame.
• Be careful not to press buttons on the LCD
frame accidentally while using the touch panel.
• If the buttons on the touch panel do not work
correctly, adjust the LCD screen
(CALIBRATION) (p. 85).
• Dots in lines may appear on the LCD screen, but
this is not a malfunction. These dots are not
recorded.
To hide the screen indicators
Press DISP/BATT INFO to toggle the
screen indicators (such as time code) on or
off.

Changing the language setting

You can change the on-screen displays to
show messages in a specified language.
Select the screen language in [
LANGUAGE] on the
MENU) (p. 34, 47).
Checking the screen indicators
(Display guide)
You can easily check the meaning of each
indicator (p. 29) that appears on the LCD
screen.
1
Touch .
60min
PAGE1 PAGE2
SPOT FOCUS
FOCUS
MENU FADER
2
Touch [DISP GUIDE].
S e l e c t a r e a f o r g u i d e .
DISP GUIDE
The indicators vary depending on the
settings.
(SETUP
– :– – : – –
SPOT DISP
METER GUIDE
END EXPO–
SCH SURE
END
Continued ,
17