Playback; Viewing Movies Recorded On A Tape - Sony Handycam DCR-HC1000 Operation Manual

Playback

Viewing movies
recorded on a tape
Make sure you have a recorded cassette
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander or using the touch
panel.
When you want to play back recordings on
your TV, see page 51.
OPEN
1
Press OPEN and open the LCD panel.
2
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
3
Touch (rewind) to go to the point
you want to view.
60min 0:00:00:00
60min
44
Playback
POWER switch
Slide the POWER
switch while
pressing the green
button.
P-MENU
4
Touch (play) to start playback.
To adjust the volume
1
Touch .
2
Touch [VOLUME].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
(STANDARD SET) menu.
3
Adjust the volume by touching
(decrease) / (increase), then touch
.
To stop playback
Touch (stop).
To pause
Touch (pause) during playback. Touch it
again to restart the playback.
Playback stops automatically when the pause
mode continues for more than 5 minutes.
To fast forward or rewind
Touch (fast forward) or
stop mode.
To review movies on the viewfinder
Close the LCD panel.
Indicators displayed during tape
playback
60min
A Remaining battery
B Recording mode (SP or LP)
C Tape transport indicator
(rewind) in
0:00:00:15
60min
P-MENU