Sony Handycam DCR-HC1000 Operation Manual page 112

Symptom
Cannot mark pictures for print.
The data file name is not indicated
correctly.
The data file name flashes.
Dubbing/Editing
Symptom
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
Cannot dub correctly using the A/V
connecting cable.
Pictures from connected devices are
not displayed correctly.
New sound added to a recorded tape
is not heard.
A title is not recorded/A cassette label
is not recorded.
The title is not displayed.
The title cannot be deleted.
112
Troubleshooting
Cause and/or Corrective Actions
cWhen you are using the "Memory Stick Duo" with the write-protect tab,
release the lock on the write-protect tab of the "Memory Stick Duo."
(p. 122)
cPerform the operation again on the index screen. (p. 102)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
• Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 121)
• The file is damaged.
• The file format is not supported on your camcorder. (p. 121)
Cause and/or Corrective Actions
cSet [VIDEO INPUT] to the appropriate signal in the
SET) menu. (p. 78)
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 80)
cSet [VIDEO INPUT] to the appropriate signal in the
SET) menu. (p. 78)
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 80)
• The A/V connecting cable is not connected properly.
cMake sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
• The input signal is not NTSC. (p. 119)
cIn the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1/FRONT] (original sound) side until the sound is heard
appropriately. (p. 77)
cUse a cassette with Cassette Memory. (p. 120)
cErase unnecessary titles when the Cassette Memory is full. (p. 74)
cSet the write-protect tab to REC. (p. 120)
• A title cannot be added to a blank section of the tape.
cSet [
TITLE DISP] to [ON] in the
(p. 75)
cSet the write-protect tab to REC. (p. 120)
(STANDARD
(STANDARD SET)
(STANDARD
(STANDARD SET)
(EDIT/PLAY) menu.